PH minus
PH minus

PH minus

$12.99
$12.99
0% off
$12.99

These pH reducing granules dissolve quickly and completely in water for rapid, residue-free results. Maintaining a balanced pH will improve swimmer comfort and protect pool equipment.

DIRECTIONS FOR USE:
To decrease pH to recommended levels, add the required quantity of product according to the chart below:

pH above 8,2 : 200g (10 000 L) 400g ( 20 000 L) 800g (40 000 L) 1.2 kg ( 60 000 L) 2 kg (100 000 L)

pH between 8,2 - 7,8 : 150g ( 10 000 L) 300g (20 000 L) 600g (40 000 L) 900g ( 60 000 L) 1,5 kg ( 100 000 L)

pH between 7,8 - 7,4 : 100g ( 10 000 L) 200g (20 000 L) 400g (40 000 L) 600g ( 60 000 L) 1 kg ( 100 000 L)

- Sprinkle product on surface of pool water.
- Let water circulate for 4 hours after adding the product, then check pH.
- Make necessary adjustments.
NOTE: Never add product when bathers are using the pool.

Read more Read less
SKU: 85946

Availability

Delivery
In stock Low stock Sold out online : 88 left
In-store pickup
Pickup available in at 00 Mirabel Pickup unavailable at 00 Mirabel
In-store availability
0 In stock at 00 Mirabel 0 In stock at 00 Mirabel Sold out at 00 Mirabel
Main Actions: Balance pH, Balance water
Product Category: Balancing Products
Dissolution: Slow
Forms: Granules
Application Method: Pre-mix
Usage Period: Monthly
Water Balance: pH too high
Safety and Storage: Protect eyes, Avoid contact with skin, Keep out of reach of children and animals, Follow the manufacturer's instructions, Store in a cool, dry place
Treatment Time: 30 min
Basin Type: Pool
Shipping is free for chemical products on orders of $50 or more. A $10 fee applies to orders under $50.

Pour diminuer le pH aux valeurs recommandées, ajouter la quantité de produit requise selon le tableau suivant :

pH supérieur à 8,2 : 200g (10 000 L) 400g ( 20 000 L) 800g (40 000 L) 1.2 kg ( 60 000 L) 2 kg (100 000 L)

pH entre 8,2 - 7,8 : 150g ( 10 000 L) 300g (20 000 L) 600g (40 000 L) 900g ( 60 000 L) 1,5 kg ( 100 000 L)

pH entre 7,8 - 7,4 : 100g ( 10 000 L) 200g (20 000 L) 400g (40 000 L) 600g ( 60 000 L) 1 kg ( 100 000 L)

- Saupoudrer le produit à la surface de l’eau de la piscine.
- Après l’ajout du produit, laisser l’eau circuler pendant 4 heures, puis vérifier le pH.
- Procéder à un nouvel ajustement si nécessaire.
REMARQUE : Ajouter le produit seulement lorsque la piscine n’est pas utilisée par des baigneurs.

Recommended products