Pool hoses

• Diameter:1.5"standard (stable flow rate).
• Length at least the largest diagonal/radius of the basin+ the depth of the pool.
• Tips: favor a swivel tip head side to avoid the twists.
• Kind:vacuum cleaner hose spiral (not to be confused with backwash hose).

• Get in the head, the pole.
• Prime the hose (purge the air):

1. In the water: plunge your head, thenpush the pipe inunderwater until hethere are no more bubbles.
2. With the return jet: glue the end of the pipe onto a water return for the fill, then plug it in quickly.

• Plug in end of the pipe skimmer(with suction plate) and the other end to the vacuum cleaner.
• Put the multiport valve on Filtration (Or Waste/Sewerif you aspire to very fine algae).
• Pump ON/running.
• Aspire in slow, parallel passes Monitor the pressure: if she goes up, do a backwash(sand) or rinsing(cartridge).

• Trigger: when the pressure rises by approximately + 20–25% vs. “clean” pressure.
• Routine: Backwash 2–3 min until the water runs clear in the sight glass, then rinse for 20–30 seconds before returning to Filtration.
• Trick: avoid the weekly “automatic” backwash; base it on themanometer.

Vacuum cleaner: gut rigid/spiral, stay full of water, diameter 1.5" tips wivel head side.

Backwash: gut flat, deploys under pressure to pump the water to the sewer; not for suction.

Choose one swivel tip vacuum cleaner head side.

Primethe hose (complete air purge) before connecting.

Avoid elbows close together and leave him heated by the sun.

Store flat or in large loops knot-free.

• Tighten the collar; if necessary, add a second necklace opposite.
• Check the adapter(diameter/condition) and unroll the hose without twisting.
  
• Before first use, fill the hose with water so that it takes its shape.
• Place it on a smooth surface And deploy it fully before opening the valve.
  
  

• Length :take long enough to reach a safe evacuation point (downhill, drain), without tight bends.
• Thickness :a gut thicker resists better abrasion and at freeze(increased lifespan).
• Connection: use metal collars(ideally two) on the adapter to avoid the leaks or that the gut jump under pressure.
  

*(Note: the width is generally standard 1.5".)