Recommended articles

Si vous déménagez dans une nouvelle maison et qu'une piscine ou un spa y sont déjà installés, vous aurez quelques informations à connaître afin de bien les faire fonctionner.
Tout d'abord, vous devez faire la mise en marche si ça n'a pas été fait. Référez-vous aux tutoriels disponibles sur notre page Youtube afin de connaître les procédures ou présentez-vous en magasin.
Une fois le tout en marche, l'idéal est de photographier votre piscine ou votre spa ainsi que tous les équipements, produits et accessoires dont vous disposez et de nous montrer le tout en magasin afin que nous puissions vous conseiller sur l'entretien.
N'oubliez pas aussi d'apporter un échantillon d'eau pour que nous vous aidions à rendre l'eau propre, agréable à la baignade et sécuritaire.
Cependant, dans le cas d'un spa, nous vous conseillons de repartir à zéro. Videz l'eau de votre spa, nettoyez la coquille ainsi que la tuyauterie et changez les cartouches de filtration. Si ce n'est pas un spa Trévi, apportez votre vieille cartouche en magasin et nous tenterons de vous trouver l'équivalent. Si c'est un spa Trévi, venez nous voir en magasin avec le numéro de série de votre spa qui se situe dans le bas d'un des panneaux et nous pourrons vous fournir la bonne cartouche.
Sachez qu'en tout temps, vous pouvez vous présenter en magasin afin d'avoir un cours d'entretien pour votre spa ou votre piscine.

Trevi
Proudly made in Quebec

When you want to empty your spa by gravity for the first time, you need to find the drain valve first.
Take it out of the spa by carefully pulling on it with pliers, then unscrew it. Afterward, you can connect a conventional garden hose and you will notice that the water does not come out instantly. It is to prevent the water to flow on you once you remove the lid and while you connect your hose.
If you carry out the manipulations for the first time, there will be a resistance when you will try to release the valve. Use a flat-head screwdriver and detach the junction to release the valve. Do not pull the hose, it could damage your spa valve.
Emptying a spa by gravity can take a few hours, therefore you should plan this in advance mainly if you are doing it during colder days. You must prevent any ice from forming in the spa’s pipework once the spa is empty.
You could also get hold of a submersible pump in one of our Trévi stores if you want to do the work faster.

Trevi
Proudly made in Quebec
Leave a comment