Moov 1.1 HP Above-Ground Pool Pump – Dual Speed 120V
Out of stock
LogisVert Eligible
- Regular price
- $499
- Sale price
- $499
- Sale
-
0% off
- Regular price
-
$499
SKU: 37348
Availability
Optimize your above-ground pool's filtration with the Moov 1.1 HP dual-speed pump, designed for reliable, quiet, and energy-efficient performance. Compact and efficient, it's easy to install in tight spaces while ensuring excellent flow for consistently clean water.
Features
- Designed for above-ground pools
- Dual-speed pump for optimal flow control
- Powerful and compact pump, ideal for tight spaces
- Ultra-quiet (36 dB) for discreet operation
- TEFC technology reducing heat and improving durability
- Two adjustable speeds to adapt performance as needed
- Integrated timers (8, 16 or 24 h) for automated management
- Optimized energy savings for efficient use
- Reliable operation without compromising on performance
Flow rate:
100 gallons per minute
Brands:
Moov
Pool type:
Above-ground pools
Speed:
Two-speed
Delivery is free for chemicals and small accessories with purchases of $50 or more. A $10 fee applies to orders under $50. We deliver quickly across Canada for this item.
REPAIR SERVICES AND INFORMATION FOR MAINTENANCE OR REPAIR
AVAILABLESPARE PARTS & REPAIR SERVICES
NOT AVAILABLE
Although Trévi cannot guarantee the availability of replacement parts, it will do its utmost to obtain them if necessary. Availability may vary from one manufacturer to another.
Although Trévi cannot guarantee the availability of replacement parts, it will do its utmost to obtain them if necessary. Availability may vary from one manufacturer to another.
Key Characteristics
Two speeds
Low noise level
Performance
Compact
Compare options
Trevi Turbo Pump
Give your pool top-quality filtration with this ultra-efficient pool pump. Designed to meet the needs of above-ground or semi-inground pools, it ensures clear and well-maintained water thanks to its reliable performance. With its exceptional durability, it’s the ideal solution to fully enjoy your oasis without compromising on quality.
- Regular price
- $299
- Sale price
- $299
- Regular price
-
$399.99
1.5 HP 2 Speed Turbo Trevi pool Pump
Give your pool top-quality filtration with this ultra-efficient pool pump. Designed to meet the needs of above-ground or semi-inground pools, it ensures clear and well-maintained water thanks to its reliable performance. Equipped with two speeds – low and high – it allows you to adjust the filtration to your needs. With its exceptional durability, it’s the ideal solution to fully enjoy your oasis without compromising on quality.
- Regular price
- $399
- Sale price
- $399
- Regular price
-
$499.99
Moov 1.1 HP Above-Ground Pool Pump – Dual Speed 120V
Optimize your above-ground pool's filtration with the Moov 1.1 HP dual-speed pump, designed for reliable, quiet, and energy-efficient performance. Compact and effective, it’s easy to install in tight spaces while ensuring excellent flow for consistently clean water.
- Regular price
- $499
- Sale price
- $499
- Regular price
-
$499
Discover our product line
Two-speed pump
Tips and advice
If you have a 2-speed turbo injection pump for your above-ground pool, there are 4 programming options available.
Option 1: High speed 24 hours a dayOption 2: 18 hours at high speed, 6 at low speed Option 3: 12 hours at high speed, 12 at low speed Option 4: 6 hours at high speed, 12 at low speed
Our consultant will explain how to program your pump and how to choose the best option depending on the season.
When starting up your pool pump after winter or after you turn it off to clean the pool pump strainer basket or filter, the pump might need a bit of priming.
Never let the pump run dry, as running a pump with no water can damage the pump and the motor. If the pump is leaking water and sucking in air, remove the pump lid, fill the pump strainer box with water, put the lid back on and restart the motor.
Programming a variable speed in-ground pool pump is a simple matter. Make sure you know how the pump functions. Our consultant explains how to do it.
During the filtration process of your pool water, the larger particles will be immediately captured by the skimmer basket. However, the finer particles will pass through the piping and end up in the pump. Therefore, it’s critical to check your pump basket regularly and clean it if necessary.
The way to clean the basket depends on whether you have an above-ground, built-in, or in-ground pool. For an in-ground pool, it’s easy, you’ll simply turn off the pump motor. Then you’ll be able to unscrew the lid, empty the basket, rinse it, put it back in place, screw it well, and put the pump back in function.
On the other hand, if you have an above-ground or a built-in pool, as the water is higher than the installations, you have to take measures to close the accesses to avoid water returning by gravity and that the pool empties when you’ll start the pump.
We’ll untangle all of this pretty easily. There are different steps to follow depending on whether your filter is sand or cartridge.
The first steps are the same. First, you’ll shut down the pump motor and then go to the skimmer. If you have a bottom drain, a three-way valve is installed under the skimmer. If you don’t have a bottom drain, there is a ball valve there. What you’ll want to do is stop the water from travelling between the skimmer and the pump. Now, you’re going to close that access. With a ball valve, it’s very quick. You’ll just put it in the Off position. If you have a three-way valve, you’ll start by unscrewing the handle. The three-way valve has a safety mechanism that prevents you from easily accessing the Off position to the pump. By pulling the handle slightly after unscrewing it, you’ll be able to turn it to prevent water from accessing the pump.
Now we’re going to look at the water’s path out of the pump. If you have a sand filter, it’s very simple. You just put it in the OFF position. If you have a cartridge filter, at the filter outlet, on the way to the water return, there is a ball valve on the pipe. You’ll position it in the Off position.
From that point on, all the accesses are closed so you can open the strainer to access the basket. You’ll notice that there is water, but it’s simply residual water in the pipes. When the pipes are empty, the water will stop flowing.
Now, opening the lid may be a bit difficult if you have a turbo injected pump. There is a tool that can be of great help. I’m going to use it. Water will overflow, but it’s not a big deal and you’ll be able to access the basket. Of course, your basket might be a little bit dirtier than this one. You need to empty it and rinse it well. Then you can put it back in and close the lid to avoid leaks when you put it back on.
Now you’ll do the opposite process before putting the pump back in function. If you have a sand filter, move the handle to the Filtration position. If you have a cartridge filter, open the ball valve at the filter outlet.
Go back to the skimmer. If you don’t have a bottom drain, put the ball valve in the Open position. If you have a bottom drain, unscrew again and allow the water to pass from the skimmer to the pump.
Everything is open and in place. Now, put the pump back in function and monitor it regularly to ensure that everything is clean.
Are you looking for an energy-efficient, high-performance and quiet solution for your pool? Or even better, you've already purchased one. In this video, we explain how Innovaqua pumps work. Innovative technology designed to optimize your pool's filtration while reducing your energy consumption.🌿 In addition to being quieter, the variable speed pump allows you to save on your electricity bill while contributing to a more sustainable use of your pool.
If you have a 2-speed turbo injection pump for your above-ground pool, there are 4 programming options available.
Option 1: High speed 24 hours a dayOption 2: 18 hours at high speed, 6 at low speed Option 3: 12 hours at high speed, 12 at low speed Option 4: 6 hours at high speed, 12 at low speed
Our consultant will explain how to program your pump and how to choose the best option depending on the season.
When starting up your pool pump after winter or after you turn it off to clean the pool pump strainer basket or filter, the pump might need a bit of priming.
Never let the pump run dry, as running a pump with no water can damage the pump and the motor. If the pump is leaking water and sucking in air, remove the pump lid, fill the pump strainer box with water, put the lid back on and restart the motor.
Programming a variable speed in-ground pool pump is a simple matter. Make sure you know how the pump functions. Our consultant explains how to do it.
During the filtration process of your pool water, the larger particles will be immediately captured by the skimmer basket. However, the finer particles will pass through the piping and end up in the pump. Therefore, it’s critical to check your pump basket regularly and clean it if necessary.
The way to clean the basket depends on whether you have an above-ground, built-in, or in-ground pool. For an in-ground pool, it’s easy, you’ll simply turn off the pump motor. Then you’ll be able to unscrew the lid, empty the basket, rinse it, put it back in place, screw it well, and put the pump back in function.
On the other hand, if you have an above-ground or a built-in pool, as the water is higher than the installations, you have to take measures to close the accesses to avoid water returning by gravity and that the pool empties when you’ll start the pump.
We’ll untangle all of this pretty easily. There are different steps to follow depending on whether your filter is sand or cartridge.
The first steps are the same. First, you’ll shut down the pump motor and then go to the skimmer. If you have a bottom drain, a three-way valve is installed under the skimmer. If you don’t have a bottom drain, there is a ball valve there. What you’ll want to do is stop the water from travelling between the skimmer and the pump. Now, you’re going to close that access. With a ball valve, it’s very quick. You’ll just put it in the Off position. If you have a three-way valve, you’ll start by unscrewing the handle. The three-way valve has a safety mechanism that prevents you from easily accessing the Off position to the pump. By pulling the handle slightly after unscrewing it, you’ll be able to turn it to prevent water from accessing the pump.
Now we’re going to look at the water’s path out of the pump. If you have a sand filter, it’s very simple. You just put it in the OFF position. If you have a cartridge filter, at the filter outlet, on the way to the water return, there is a ball valve on the pipe. You’ll position it in the Off position.
From that point on, all the accesses are closed so you can open the strainer to access the basket. You’ll notice that there is water, but it’s simply residual water in the pipes. When the pipes are empty, the water will stop flowing.
Now, opening the lid may be a bit difficult if you have a turbo injected pump. There is a tool that can be of great help. I’m going to use it. Water will overflow, but it’s not a big deal and you’ll be able to access the basket. Of course, your basket might be a little bit dirtier than this one. You need to empty it and rinse it well. Then you can put it back in and close the lid to avoid leaks when you put it back on.
Now you’ll do the opposite process before putting the pump back in function. If you have a sand filter, move the handle to the Filtration position. If you have a cartridge filter, open the ball valve at the filter outlet.
Go back to the skimmer. If you don’t have a bottom drain, put the ball valve in the Open position. If you have a bottom drain, unscrew again and allow the water to pass from the skimmer to the pump.
Everything is open and in place. Now, put the pump back in function and monitor it regularly to ensure that everything is clean.
Are you looking for an energy-efficient, high-performance and quiet solution for your pool? Or even better, you've already purchased one. In this video, we explain how Innovaqua pumps work. Innovative technology designed to optimize your pool's filtration while reducing your energy consumption.🌿 In addition to being quieter, the variable speed pump allows you to save on your electricity bill while contributing to a more sustainable use of your pool.
If you have a 2-speed turbo injection pump for your above-ground pool, there are 4 programming options available.
Option 1: High speed 24 hours a dayOption 2: 18 hours at high speed, 6 at low speed Option 3: 12 hours at high speed, 12 at low speed Option 4: 6 hours at high speed, 12 at low speed
Our consultant will explain how to program your pump and how to choose the best option depending on the season.
When starting up your pool pump after winter or after you turn it off to clean the pool pump strainer basket or filter, the pump might need a bit of priming.
Never let the pump run dry, as running a pump with no water can damage the pump and the motor. If the pump is leaking water and sucking in air, remove the pump lid, fill the pump strainer box with water, put the lid back on and restart the motor.
Programming a variable speed in-ground pool pump is a simple matter. Make sure you know how the pump functions. Our consultant explains how to do it.
During the filtration process of your pool water, the larger particles will be immediately captured by the skimmer basket. However, the finer particles will pass through the piping and end up in the pump. Therefore, it’s critical to check your pump basket regularly and clean it if necessary.
The way to clean the basket depends on whether you have an above-ground, built-in, or in-ground pool. For an in-ground pool, it’s easy, you’ll simply turn off the pump motor. Then you’ll be able to unscrew the lid, empty the basket, rinse it, put it back in place, screw it well, and put the pump back in function.
On the other hand, if you have an above-ground or a built-in pool, as the water is higher than the installations, you have to take measures to close the accesses to avoid water returning by gravity and that the pool empties when you’ll start the pump.
We’ll untangle all of this pretty easily. There are different steps to follow depending on whether your filter is sand or cartridge.
The first steps are the same. First, you’ll shut down the pump motor and then go to the skimmer. If you have a bottom drain, a three-way valve is installed under the skimmer. If you don’t have a bottom drain, there is a ball valve there. What you’ll want to do is stop the water from travelling between the skimmer and the pump. Now, you’re going to close that access. With a ball valve, it’s very quick. You’ll just put it in the Off position. If you have a three-way valve, you’ll start by unscrewing the handle. The three-way valve has a safety mechanism that prevents you from easily accessing the Off position to the pump. By pulling the handle slightly after unscrewing it, you’ll be able to turn it to prevent water from accessing the pump.
Now we’re going to look at the water’s path out of the pump. If you have a sand filter, it’s very simple. You just put it in the OFF position. If you have a cartridge filter, at the filter outlet, on the way to the water return, there is a ball valve on the pipe. You’ll position it in the Off position.
From that point on, all the accesses are closed so you can open the strainer to access the basket. You’ll notice that there is water, but it’s simply residual water in the pipes. When the pipes are empty, the water will stop flowing.
Now, opening the lid may be a bit difficult if you have a turbo injected pump. There is a tool that can be of great help. I’m going to use it. Water will overflow, but it’s not a big deal and you’ll be able to access the basket. Of course, your basket might be a little bit dirtier than this one. You need to empty it and rinse it well. Then you can put it back in and close the lid to avoid leaks when you put it back on.
Now you’ll do the opposite process before putting the pump back in function. If you have a sand filter, move the handle to the Filtration position. If you have a cartridge filter, open the ball valve at the filter outlet.
Go back to the skimmer. If you don’t have a bottom drain, put the ball valve in the Open position. If you have a bottom drain, unscrew again and allow the water to pass from the skimmer to the pump.
Everything is open and in place. Now, put the pump back in function and monitor it regularly to ensure that everything is clean.
Are you looking for an energy-efficient, high-performance and quiet solution for your pool? Or even better, you've already purchased one. In this video, we explain how Innovaqua pumps work. Innovative technology designed to optimize your pool's filtration while reducing your energy consumption.🌿 In addition to being quieter, the variable speed pump allows you to save on your electricity bill while contributing to a more sustainable use of your pool.
If you have a 2-speed turbo injection pump for your above-ground pool, there are 4 programming options available.
Option 1: High speed 24 hours a dayOption 2: 18 hours at high speed, 6 at low speed Option 3: 12 hours at high speed, 12 at low speed Option 4: 6 hours at high speed, 12 at low speed
Our consultant will explain how to program your pump and how to choose the best option depending on the season.
When starting up your pool pump after winter or after you turn it off to clean the pool pump strainer basket or filter, the pump might need a bit of priming.
Never let the pump run dry, as running a pump with no water can damage the pump and the motor. If the pump is leaking water and sucking in air, remove the pump lid, fill the pump strainer box with water, put the lid back on and restart the motor.
Programming a variable speed in-ground pool pump is a simple matter. Make sure you know how the pump functions. Our consultant explains how to do it.
During the filtration process of your pool water, the larger particles will be immediately captured by the skimmer basket. However, the finer particles will pass through the piping and end up in the pump. Therefore, it’s critical to check your pump basket regularly and clean it if necessary.
The way to clean the basket depends on whether you have an above-ground, built-in, or in-ground pool. For an in-ground pool, it’s easy, you’ll simply turn off the pump motor. Then you’ll be able to unscrew the lid, empty the basket, rinse it, put it back in place, screw it well, and put the pump back in function.
On the other hand, if you have an above-ground or a built-in pool, as the water is higher than the installations, you have to take measures to close the accesses to avoid water returning by gravity and that the pool empties when you’ll start the pump.
We’ll untangle all of this pretty easily. There are different steps to follow depending on whether your filter is sand or cartridge.
The first steps are the same. First, you’ll shut down the pump motor and then go to the skimmer. If you have a bottom drain, a three-way valve is installed under the skimmer. If you don’t have a bottom drain, there is a ball valve there. What you’ll want to do is stop the water from travelling between the skimmer and the pump. Now, you’re going to close that access. With a ball valve, it’s very quick. You’ll just put it in the Off position. If you have a three-way valve, you’ll start by unscrewing the handle. The three-way valve has a safety mechanism that prevents you from easily accessing the Off position to the pump. By pulling the handle slightly after unscrewing it, you’ll be able to turn it to prevent water from accessing the pump.
Now we’re going to look at the water’s path out of the pump. If you have a sand filter, it’s very simple. You just put it in the OFF position. If you have a cartridge filter, at the filter outlet, on the way to the water return, there is a ball valve on the pipe. You’ll position it in the Off position.
From that point on, all the accesses are closed so you can open the strainer to access the basket. You’ll notice that there is water, but it’s simply residual water in the pipes. When the pipes are empty, the water will stop flowing.
Now, opening the lid may be a bit difficult if you have a turbo injected pump. There is a tool that can be of great help. I’m going to use it. Water will overflow, but it’s not a big deal and you’ll be able to access the basket. Of course, your basket might be a little bit dirtier than this one. You need to empty it and rinse it well. Then you can put it back in and close the lid to avoid leaks when you put it back on.
Now you’ll do the opposite process before putting the pump back in function. If you have a sand filter, move the handle to the Filtration position. If you have a cartridge filter, open the ball valve at the filter outlet.
Go back to the skimmer. If you don’t have a bottom drain, put the ball valve in the Open position. If you have a bottom drain, unscrew again and allow the water to pass from the skimmer to the pump.
Everything is open and in place. Now, put the pump back in function and monitor it regularly to ensure that everything is clean.
Are you looking for an energy-efficient, high-performance and quiet solution for your pool? Or even better, you've already purchased one. In this video, we explain how Innovaqua pumps work. Innovative technology designed to optimize your pool's filtration while reducing your energy consumption.🌿 In addition to being quieter, the variable speed pump allows you to save on your electricity bill while contributing to a more sustainable use of your pool.
If you have a 2-speed turbo injection pump for your above-ground pool, there are 4 programming options available.
Option 1: High speed 24 hours a dayOption 2: 18 hours at high speed, 6 at low speed Option 3: 12 hours at high speed, 12 at low speed Option 4: 6 hours at high speed, 12 at low speed
Our consultant will explain how to program your pump and how to choose the best option depending on the season.
When starting up your pool pump after winter or after you turn it off to clean the pool pump strainer basket or filter, the pump might need a bit of priming.
Never let the pump run dry, as running a pump with no water can damage the pump and the motor. If the pump is leaking water and sucking in air, remove the pump lid, fill the pump strainer box with water, put the lid back on and restart the motor.
Programming a variable speed in-ground pool pump is a simple matter. Make sure you know how the pump functions. Our consultant explains how to do it.
During the filtration process of your pool water, the larger particles will be immediately captured by the skimmer basket. However, the finer particles will pass through the piping and end up in the pump. Therefore, it’s critical to check your pump basket regularly and clean it if necessary.
The way to clean the basket depends on whether you have an above-ground, built-in, or in-ground pool. For an in-ground pool, it’s easy, you’ll simply turn off the pump motor. Then you’ll be able to unscrew the lid, empty the basket, rinse it, put it back in place, screw it well, and put the pump back in function.
On the other hand, if you have an above-ground or a built-in pool, as the water is higher than the installations, you have to take measures to close the accesses to avoid water returning by gravity and that the pool empties when you’ll start the pump.
We’ll untangle all of this pretty easily. There are different steps to follow depending on whether your filter is sand or cartridge.
The first steps are the same. First, you’ll shut down the pump motor and then go to the skimmer. If you have a bottom drain, a three-way valve is installed under the skimmer. If you don’t have a bottom drain, there is a ball valve there. What you’ll want to do is stop the water from travelling between the skimmer and the pump. Now, you’re going to close that access. With a ball valve, it’s very quick. You’ll just put it in the Off position. If you have a three-way valve, you’ll start by unscrewing the handle. The three-way valve has a safety mechanism that prevents you from easily accessing the Off position to the pump. By pulling the handle slightly after unscrewing it, you’ll be able to turn it to prevent water from accessing the pump.
Now we’re going to look at the water’s path out of the pump. If you have a sand filter, it’s very simple. You just put it in the OFF position. If you have a cartridge filter, at the filter outlet, on the way to the water return, there is a ball valve on the pipe. You’ll position it in the Off position.
From that point on, all the accesses are closed so you can open the strainer to access the basket. You’ll notice that there is water, but it’s simply residual water in the pipes. When the pipes are empty, the water will stop flowing.
Now, opening the lid may be a bit difficult if you have a turbo injected pump. There is a tool that can be of great help. I’m going to use it. Water will overflow, but it’s not a big deal and you’ll be able to access the basket. Of course, your basket might be a little bit dirtier than this one. You need to empty it and rinse it well. Then you can put it back in and close the lid to avoid leaks when you put it back on.
Now you’ll do the opposite process before putting the pump back in function. If you have a sand filter, move the handle to the Filtration position. If you have a cartridge filter, open the ball valve at the filter outlet.
Go back to the skimmer. If you don’t have a bottom drain, put the ball valve in the Open position. If you have a bottom drain, unscrew again and allow the water to pass from the skimmer to the pump.
Everything is open and in place. Now, put the pump back in function and monitor it regularly to ensure that everything is clean.
Are you looking for an energy-efficient, high-performance and quiet solution for your pool? Or even better, you've already purchased one. In this video, we explain how Innovaqua pumps work. Innovative technology designed to optimize your pool's filtration while reducing your energy consumption.🌿 In addition to being quieter, the variable speed pump allows you to save on your electricity bill while contributing to a more sustainable use of your pool.