Spa ph minus
Spa ph minus

Spa ph minus

$10.99
$10.99
0% off
$10.99

This product is a pH reducer. Its granular formula dissolves and acts quickly in hot water, without leaving deposits. Maintaining a balanced pH ensures the comfort of bathers and the protection of spa equipment.

FEATURES

Type of bassin: Spa
Product type: Balancing product
Function: Decreases ph level.
Period of use: Maintenance
Treatment time: 15 minutes
Quantity: Add 15 g per 1,000 L of spa water to reduce pH by approx. 0.5 and alkalinity by approx. 6 ppm.
How to use: Pour directly into spa water.

NOTE

1. Maintain appropriate daily levels: pH: 7.2 - 7.8 and total alkalinity: 100 - 150 ppm.
2. When analysis indicates higher values, add 15 g per 1,000 L of spa water to lower pH by approx. 0.5 and alkalinity by approx. 6 ppm.
3. Before adding the product to the spa, dissolve it by mixing with water in a clean plastic container. Pour the solution obtained into the spa water in several places.
4. The spa must be running when the product is added.
5. Wait 15 minutes and recheck pH and alkalinity.
6. Repeat the operation until the levels are at the appropriate values.

SPECIFICATIONS

1.4 kg

Read more Read less
SKU: 85111

Availability

Delivery
In stock Low stock Sold out online : 76 left
In-store pickup
Pickup available in at 00 Mirabel Pickup unavailable at 00 Mirabel
In-store availability
-1 In stock at 00 Mirabel -1 In stock at 00 Mirabel Sold out at 00 Mirabel
Main Actions: Balance pH, Balance water
Product Category: Balancing Products
Dissolution: Fast
Forms: Granules
Application Method: To pour directly into the water
Water Balance: pH too high
Safety and Storage: Protect eyes, Avoid contact with skin, Keep out of reach of children and animals, Follow the manufacturer's instructions, Store in a cool, dry place
Treatment Time: 30 min
Basin Type: Spa
Shipping is free for chemical products on orders of $50 or more. A $10 fee applies to orders under $50.

1. Maintenir quotidiennement les teneurs aux valeurs appropriées : pH : 7,2 – 7,8 et l'alcalinité totale : 100 – 150 ppm
2. Lorsque l’analyse indique des valeurs supérieures, ajouter 15 g par 1 000 L d’eau de spa pour diminuer le pH d'environ 0,5 et l’alcalinité d'environ 6 ppm.
3. Avant d’ajouter le produit au spa, le dissoudre en le mélangeant avec de l’eau dans un récipient propre en plastique. Verser la solution obtenue dans l’eau du spa à plusieurs endroits.
4. Le spa doit être en fonction lors de l'ajout du produit.
5. Attendre 15 minutes et vérifier à nouveau le pH et l'alcalinité.
6. Répéter l’opération jusqu’à ce que les teneurs soient aux valeurs appropriées.

Recommended products