Bromine tablets for swimming pools

Bromine is used to disinfect water by destroying bacteria, algae, and organic impurities. It works similarly to chlorine, but has the advantage of being more stable in warm water and less odorous. In an indoor pool, bromine is often more comfortable for swimmers sensitive to chlorine odors or eye irritation. However, it is less popular in outdoor pools because it degrades quickly in sunlight and is more expensive.

Yes, but bromine is generally used in spas rather than swimming pools. It remains effective in warm water, has almost no odor, and tolerates pH fluctuations better. However, it is more expensive than chlorine and cannot be stabilized against sunlight. This means that bromine is consumed much faster in outdoor pools exposed to UV rays. It can, however, be a good choice for an indoor pool.

To quickly increase the bromine level, add tablets to the brominator and increase the flow rate to accelerate dissolution. You can also perform a shock treatment: this transforms the bromamines (the "used" bromine) into active bromine, which immediately raises the disinfection level. Also, ensure that the pH is properly balanced, as a pH that is too high reduces the effectiveness of the bromine.

The number of tablets depends on the pool volume and the brominator model. Generally, enough tablets are added to partially fill the pipe, which is equivalent to...3 to 6 lozengesFor a residential pool, the goal is to maintain a stable level between 3 and 5 ppm. Monitor the test strips regularly and adjust the amount or opening of the brominator as needed.

To adjust the bromine level in a swimming pool, start by checking it with a test strip: the ideal range is between 3 and 5 ppm. If the level is too low, add bromine tablets to a brominator (never directly into the skimmer). Then adjust the brominator's opening to control the dissolution. If the level is unstable, perform a shock treatment to reactivate the bromamines, as bromine works in a "cycle" and regains its effectiveness after oxidation. Good circulation and a pH between 7.2 and 7.8 also improve bromine performance.

Pour utiliser un flotteur de pastilles, il suffit d’y déposer vos pastilles de chlore ou de brome, puis de refermer le couvercle. Placez ensuite le flotteur directement à la surface du spa. Il libère graduellement le désinfectant dans l’eau afin de maintenir un niveau constant. Assurez-vous de vérifier régulièrement le flotteur pour ajouter des pastilles au besoin et éviter qu’il ne soit complètement vide. Le flotteur doit toujours rester en surface et circuler librement dans le spa.