Filter Cleaner
Filter Cleaner

Filter Cleaner

$14.99
$14.99
0% off
$14.99

This concentrated cleaner quickly removes dirt, scale, rust, body oils and cosmetics from reusable pool sand and cartridge filters. Periodic use of this cleaner will improve the performance of the filtration system and increase the lifespan of the cartridge or sand.

Read more Read less
SKU: 110

Availability

Delivery
In stock Low stock Sold out online : 779 left
In-store pickup
Pickup available in at 00 Mirabel Pickup unavailable at 00 Mirabel
In-store availability
779 In stock at 00 Mirabel 779 In stock at 00 Mirabel Sold out at 00 Mirabel

This concentrated cleaner quickly removes dirt, scale, rust, body oils and cosmetics from reusable pool sand and cartridge filters. Periodic use of this cleaner will improve the performance of the filtration system and increase the lifespan of the cartridge or sand.

DIRECTIONS FOR USE:
CARTRIDGE FILTERS:
1. Dilute 250 mL in a plastic pail containing 5 L of water, depending on height of cartridge.
2. Place cartridge upright in pail. Ensure it is completely submerged in solution. Allow to soak for at least 6 hours.
3. Remove cartridge from solution and rinse immediately with cold tap water.
4. Let cartridge dry and put back in filter.
SAND FILTERS:
1. Raise pool water to maximum level above skimmer. Make sure skimmer basket is clean and empty.
2. Stop the pump and set valve to “Filter”.
3. If filter is located close to skimmer: Pour contents into skimmer. Start pump and let run for 5 seconds then stop.
If filter is located far from skimmer: Pour contents into pump basket, close the lid and run pump until the colored liquid runs clear.
4. Let stand for 8 hours.
5. After 8 hours, set pump to “Backwash”, start pump and let run for 2 to 5 minutes. Stop pump, set value to “Filter” and restart.
Main Actions: Clean surfaces
Product Category: Cleaners
Forms: Liquid
Application Method: To place in the skimmer
Usage Period: Closing
Safety and Storage: Protect eyes, Avoid contact with skin, Keep out of reach of children and animals, Follow the manufacturer's instructions, Store in a cool, dry place
Basin Type: Pool
Shipping is free for chemical products on orders of $50 or more. A $10 fee applies to orders under $50.

CARTRIDGE FILTERS

1. Dilute 250 mL in a plastic pail containing 5 L of water, depending on height of cartridge.
2. Place cartridge upright in pail. Ensure it is completely submerged in solution. Allow to soak for at least 6 hours.
3. Remove cartridge from solution and rinse immediately with cold tap water.
4. Let cartridge dry and put back in filter.

SAND FILTERS

1. Raise pool water to maximum level above skimmer. Make sure skimmer basket is clean and empty.
2. Stop the pump and set valve to “Filter”.
3. If filter is located close to skimmer: Pour contents into skimmer. Start pump and let run for 5 seconds then stop.
If filter is located far from skimmer: Pour contents into pump basket, close the lid and run pump until the colored liquid runs clear.
4. Let stand for 8 hours.
5. After 8 hours, set pump to “Backwash”, start pump and let run for 2 to 5 minutes. Stop pump, set value to “Filter” and restart.

Recommended products