Pool equipment
Pentair UltraTemp heat pump
Pool Heat pumps
Available online
Available in store
Not available
215, rue Bellehumeur
Gatineau, QC, J8T 8H3
Not available
8240, boul. Leduc, suite 40
Brossard, QC, J4Y 0K7
Not available
1805, autoroute Jean-Noël-Lavoie (440 Ouest)
Laval, QC, H7L 3W3
Not available
96, montée Masson
Mascouche, QC, J7K 3B5
Not available
89, rue Jean-Guyon
Blainville, QC, J7C 0K6
Not available
909, boul. Pierre-Bertrand Sud
Québec, QC, G1M 3R8
Not available
1235, rue Ampère
Boucherville, QC, J4B 7M6
Not available
4750, boul. Guillaume-Couture
Lévis, QC, G6W 6W4
Not available
2335, route Transcanadienne (Mega Centre des Sources)
Pointe-Claire, QC, H9R 5Z5
To install your pool heat pump or heater, place the unit on a stable surface with good air circulation, connect it to the plumbing system and a compliant power supply, perform a test run by adjusting the temperature, and check the system for leaks and safety. Find out more.
To choose the right heat pump for your pool, consider the size of your pool and the desired temperature. The larger the pool and the colder the climate, the more BTUs you'll need. A solar blanket can also reduce heat loss and power requirements. In general, we recommend a heat pump that delivers between 1.3 and 1.5 BTU per liter of water.
A pool heat pump requires little maintenance: just check that the vents are clear and, when shutting down, make sure there's no water left in the system before covering it up for the winter.
The water heater is fast and efficient, heats water quickly but costs more in energy, making it ideal for occasional use or in colder regions. A heat pump, on the other hand, is more economical in the long term, maintains pool temperature over time, but is slower and performs better in moderate climates, above 10°C. It's ideal for frequent use, despite a higher initial cost.