Specialized products

Metaloc plus

$29.99
Rating:
100% of 100
Reference:
SKU
116
Screen Icon

Available online

Store Icon

Available in store

  • 115 Available

    Laval 440

    1805, autoroute Jean-Noël-Lavoie (440 Ouest)
    Laval, QC, H7L 3W3

    Monday - Sunday: 10:00 - 17:00
  • 46 Available

    Blainville

    89, rue Jean-Guyon
    Blainville, QC, J7C 0K6

    Monday - Sunday: 10:00 - 17:00
  • 46 Available

    Lévis

    4750, boul. Guillaume-Couture
    Lévis, QC, G6W 6W4

    Monday - Sunday: 10:00 - 17:00
  • 38 Available

    Québec

    909, boul. Pierre-Bertrand Sud
    Québec, QC, G1M 3R8

    Monday - Sunday: 10:00 - 17:00
  • 38 Available

    Pointe-Claire

    2335, route Transcanadienne (Mega Centre des Sources)
    Pointe-Claire, QC, H9R 5Z5

    Monday - Sunday: 10:00 - 17:00
  • 27 Available

    Boucherville

    1235, rue Ampère
    Boucherville, QC, J4B 7M6

    Monday - Sunday: 10:00 - 17:00
  • 14 Available

    Brossard - DIX30

    8240, boul. Leduc, suite 40
    Brossard, QC, J4Y 0K7

    Monday - Sunday: 10:00 - 17:00
  • Not available

    Gatineau

    215, rue Bellehumeur
    Gatineau, QC, J8T 8H3

    Monday - Sunday: 10:00 - 17:00
  • Not available

    Mascouche

    96, montée Masson
    Mascouche, QC, J7K 3B5

    Monday - Sunday: 10:00 - 17:00

Product Overview

This granular sequestrant solubilizes metals such as as manganese, iron and copper to clarify pool water discoloured by these metals. It can also be used to remove stains caused by these metals on all types of pool surfaces.

DIRECTIONS FOR USE:
1. Adjust pH to between 6.8 and 7.2. Let chlorine level drop below 2 ppm.
2. For pool water coloration, pour 150 g per 10,000 L of pool water directly over the pool surface. For stain removal, proceed to #3.
3. Brush affected areas.
4. Add 150 g per 10,000 L of pool water to a pail of water and apply the concentrated solution along the pool walls and/or in areas where staining is present. Where stains are most prevalent directly brush with the product.
5. Severe staining of surfaces may require up to 300 g per 10,000 L of pool water.
6. Allow the circulation system to run continuously for 24 hours.
7. After 24 hours, adjust pH to between 7.2 and 7.8 and alkalinity to between 80 and 120 ppm.
8. Do not superchlorinate water for at least 72 hours.
9. Use a complementary product on a weekly basis to prevent the reoccurrence of staining of pool surfaces or water coloration.

Specifications

Format 1.2 kg

Related posts

Write Your Own Review
You're reviewing: Metaloc plus
Your Rating
Help Center